C-Max Gravers

Years of development have produced a tungsten carbide graver with the right blend of hardness and toughness for hand engraving and stone setting applications. C-Max achieves a metallurgical balance like no other carbide. Try these tools and do better work in noticeably less time.

Subgroups

C-Max V-Point

With pre-formed burins you save time sharpening the burins.
These burins are suitable for tool holder no. 609218 "GRS 004-873".

name	Version	shape	type	GRS	item No.
graver	V-tips	60° - 2,3mm	C-Max HM	022-615	530008
graver	V-tips	75° -2,85mm	C-Max HM	022-616	530009
graver	V-tips	90° - 2,85mm	C-Max HM	022-617	530010
graver	V-tips	105° - 3.17mm	C-Max HM	022-618	530011
graver	V-tips	120° - 3.17mm	C-Max HM	022-619	530012

C-Max Onglette

The angled sides of this C-Max stylus taper to a pointed bottom edge of the stylus.
These gravers are suitable for tool holder no. 609218 "GRS 004-873".

name	Version	shape	type	GRS	item No.
graver	tip	#0 - 1.4mm	C-Max HM	022-625	530050
graver	tip	#1 - 1.6mm	C-Max HM	022-626	530051
graver	tip	#2 - 2.0mm	C-Max HM	022-627	530052
graver	tip	#3 - 2.2mm	C-Max HM	022-628	530053
graver	tip	#4 - 2.4mm	C-Max HM	022-629	530054
graver	tip	#5 - 2.6mm	C-Max HM	022-630	530055

C-Max Tapered Round

The angled side surfaces of this C-Max stylus taper to a round bottom edge of the stylus.
These gravers are suitable for tool holder no. 609218 "GRS 004-873".

name	Version	shape	type	GRS	item No.
graver	Boll (#50)	#2 - 0,2mm	C-Max HM	022-680	530090
graver	Boll (#51)	#4 - 0,4mm	C-Max HM	022-681	530091
graver	Boll (#52)	#6 - 0,6mm	C-Max HM	022-682	530092
graver	Boll (#53)	#8 - 0,8mm	C-Max HM	022-683	530093
graver	Boll (#54)	#10 - 1,0mm	C-Max HM	022-684	530094
graver	Boll (#55)	#12 - 1,2mm	C-Max HM	022-685	530095
graver	Boll (#56)	#14 - 1,4mm	C-Max HM	022-686	530096

C-Max Tapered Flat

The angled side surfaces of this C-Max stylus taper to a flat bottom edge of the stylus.
These gravers are suitable for tool holder no. 609218 "GRS 004-873".

name	Version	shape	type	GRS	item No.
graver	flat, conical (#36)	#2 - 0,2mm	C-Max HM	022-723	530060
graver	flat, conical (#37)	#4 - 0,4mm	C-Max HM	022-724	530061
graver	flat, conical (#38)	#6 - 0,6mm	C-Max HM	022-725	530062
graver	flat, conical (#39)	#8 - 0,8mm	C-Max HM	022-726	530063
graver	flat, conical (#40)	#10 - 1,0mm	C-Max HM	022-727	530064
graver	flat, conical (#41)	#12 - 1,2mm	C-Max HM	022-728	530065
graver	flat, conical (#42)	#14 - 1,4mm	C-Max HM	022-729	530066
graver	flat, conical (#43)	#16 - 1,6mm	C-Max HM	022-730	530067
graver	flat, conical (#44)	#18 - 1,8mm	C-Max HM	022-731	530068
graver	flat, conical (#45)	#20 - 2,0mm	C-Max HM	022-732	530069

C-Max Parallel Flat

This C-Max graver has parallel side surfaces and a flat graver lower edge.
These gravers are suitable for tool holder no. 609218 "GRS 004-873".

name	Version	shape	type	GRS	item No.
graver	flat, parallel (#38)	#6 - 0,6mm	C-Max HM	022-712	530070
graver	flat, parallel (#39)	#8 - 0,8mm	C-Max HM	022-713	530071
graver	flat, parallel (#40)	#10 - 1,0mm	C-Max HM	022-714	530072
graver	flat, parallel (#41)	#12 - 1,2mm	C-Max HM	022-715	530073
graver	flat, parallel (#42)	#14 - 1,4mm	C-Max HM	022-716	530074
graver	flat, parallel (#43)	#16 - 1,6mm	C-Max HM	022-717	530075
graver	flat, parallel (#44)	#18 - 1,8mm	C-Max HM	022-718	530076
graver	flat, parallel (#45)	#20 - 2,0mm	C-Max HM	022-719	530077

C-Max Narrow Bevel

This wide-angle facet graver with precision-ground parallel sides and a rounded top edge provides an accurate, pre-formed cutting angle.
These gravers are suitable for tool holder no. 609218 "GRS 004-873".

name Version shape type GRS item No.
graver facet, parallel 90° - 1,37mm C-Max HM 022-667 530057
graver facet, parallel 105° - 1.37mm C-Max HM 022-668 530058
graver facet, parallel 120° - 1.37mm C-Max HM 022-669 530059

name	Version	shape	type	GRS	item No.
graver	facet, parallel	90° - 1,37mm	C-Max HM	022-667	530057
graver	facet, parallel	105° - 1.37mm	C-Max HM	022-668	530058
graver	facet, parallel	120° - 1.37mm	C-Max HM	022-669	530059

C-Max RFF Point

Similar to traditional V-pointed gravers, the C-Max RFF-pointed gravers with rounded upper edge are available in different angles from ultra-thin 30° to very wide 120°.
These gravers are suitable for tool holder no. 609218 "GRS 004-873".

name	Version	shape	type	GRS	item No.
graver	wedge	30° - 1,5mm	C-Max HM	022-792	530080
graver	wedge	45° - 2,1mm	C-Max HM	022-793	530081
graver	wedge	60° - 2,6mm	C-Max HM	022-794	530082
graver	wedge	75° - 3,0mm	C-Max HM	022-795	530083
graver	wedge	90° - 3,1mm	C-Max HM	022-796	530084
graver	wedge	105°- 3.1mm	C-Max HM	022-797	530085
graver	wedge	120° - 3.1mm	C-Max HM	022-798	530086

C-Max Step-Blanks

These new C-Max carbide blanks improve the working efficiency of stone barrels and engravers thanks to their balanced stepped tips.
These gravers are suitable for tool holder no. 609216 "GRS 004-853".

name	Version	shape	type	GRS	item No.
stepped round graver	needle tip		C-Max HM	022-791	530040
stepped round graver	tip 12mm	Ø 0,8mm	C-Max HM	022-782	530041
stepped round graver	tip 12mm	Ø 1,0mm	C-Max HM	022-783	530042
stepped round graver	tip 12mm	Ø 1,2mm	C-Max HM	022-784	530043
stepped round graver	tip 15mm	Ø 1,4mm	C-Max HM	022-785	530044
stepped round graver	tip 15mm	Ø 1,6mm	C-Max HM	022-786	530045
stepped round graver	tip 15mm	Ø 1,8mm	C-Max HM	022-787	530046
stepped round graver	tip 15mm	Ø 2,0mm	C-Max HM	022-788	530047
stepped round graver	tip 15mm	Ø 2,2mm	C-Max HM	022-789	530048
stepped round gravers	Con. 10 pieces	selection	C-Max HM	022-854	530049

C-Max Blanks

Grind gravers and tools according to your needs.

name	Version	shape	type	GRS	item No.
blank graver	square	2mm	C-Max HM	022-612	530006
blank graver	square	2,38mm	C-Max HM	022-610	530005
blank graver	Round	3,17mm	C-Max HM	022-611	530007
blank graver	Round	2,35mm	C-Max HM	022-393	530004
blank graver	Round	1,80mm	C-Max HM	022-622	530003

C-Max hand engraver

name Version shape type GRS item No.
C-Max burin kit Handle and engraver 90° C-Max HM 044-504 530000
graver Hand-Engraver special C-Max HM 022-620 530002

name	Version	shape	type	GRS	item No.
C-Max burin kit	Handle and engraver	90°	C-Max HM	044-504	530000
graver	Hand-Engraver	special	C-Max HM	022-620	530002

QC tool holder

name	Version	seating Ø	GRS	item No.
QC tool holder	QC-Soft	3.45mm	004-870	609214
QC tool holder	QC-Standard	3.45mm	004-803	609215
QC tool holder	Round	2.35mm	004-853	609216
QC tool holder	Round	1.80mm	004-852	609217
QC tool holder	Round	3.17mm	004-873	609218

TAP Magic

name Version addition GRS item No.
TAP Magic Lubricant Hochglanzpolitur 004-638 530099

e-Shop Katalog

C-Max Gravers

fits to it

more interesting products

promo-set

2-in-1 Aftercare Spray

Gel casing cushion